lax0601 发表于 2023-2-17 20:39:21

大佬们帮忙看看这台 E71 是不是没救了。

闲置十多年了,之前有没有毛病不记得了,现在充电以后开机只有键盘亮灯和屏幕背光,无法进入白屏播放牵手动画,大约一分钟后恢复关机状态。


使用凤凰,JAF和塞班助手都强刷过,能完成固件写入,但之后的自动重启屏幕会闪一下白(可能JAF和塞班助手没有闪白,没太注意),之后就跟以前一样灰屏然后关机。

我先用的凤凰,刷的时候不能完成驱动安装,需要不停点按开机键才能装完所有驱动,之后再用JAF和塞班助手刷没有遇到驱动问题。

固件版本是没问题的,刷机记录我贴在下面。
------------------------------------
凤凰:


Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 2080457 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Flashing SingleAsic device...
Asic CMT: Start programming 110440 KB...
Asic CMT: Erasing rm493_510.21.009_prd.c00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Partitioning rm493_510.21.009_prd.c00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing rm493_510.21.009_prd.v01
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm493_510.21.009.02U
Asic CMT: Erasing RM493_ENO_0741.10_100.71.844.1.a15.fpsx
Asic CMT: Programming rm493_510.21.009_prd.c00
Asic CMT: Programming0%
Asic CMT: Programming2%
Asic CMT: Programming4%
Asic CMT: Programming6%
Asic CMT: Programming8%
Asic CMT: Programming10%
Asic CMT: Programming12%
Asic CMT: Programming14%
Asic CMT: Programming16%
Asic CMT: Programming18%
Asic CMT: Programming20%
Asic CMT: Programming22%
Asic CMT: Programming24%
Asic CMT: Programming26%
Asic CMT: Programming28%
Asic CMT: Programming30%
Asic CMT: Programming32%
Asic CMT: Programming34%
Asic CMT: Programming36%
Asic CMT: Programming38%
Asic CMT: Programming40%
Asic CMT: Programming42%
Asic CMT: Programming44%
Asic CMT: Programming46%
Asic CMT: Programming48%
Asic CMT: Programming50%
Asic CMT: Programming52%
Asic CMT: Programming54%
Asic CMT: Programming56%
Asic CMT: Programming rm493_510.21.009_prd.v01
Asic CMT: Programming58%
Asic CMT: Programming60%
Asic CMT: Programming62%
Asic CMT: Programming64%
Asic CMT: Programming66%
Asic CMT: Programming68%
Asic CMT: Programming70%
Asic CMT: Programming72%
Asic CMT: Programming74%
Asic CMT: Programming76%
Asic CMT: Programming78%
Asic CMT: Programming80%
Asic CMT: Programming82%
Asic CMT: Programming84%
Asic CMT: Programming86%
Asic CMT: Programming rm493_510.21.009.02U
Asic CMT: Programming88%
Asic CMT: Programming90%
Asic CMT: Programming92%
Asic CMT: Programming94%
Asic CMT: Programming96%
Asic CMT: Programming98%
Asic CMT: Programming RM493_ENO_0741.10_100.71.844.1.a15.fpsx
Asic CMT: Programming100%
Finished Flashing
Rebooting to RFS Mode
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted


------------------------------------

JAF:


JAF version 1.98.62
Detected PKEY: 90007BF6
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.78.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\

Searching for default location of ini...
Checking path: \Products\RM-493\
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-493\
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.c00
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.v395_20
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_20.395U
APE Variant file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\E71_SW_040-069273_CHINAREG_2G_9.0.fpsx
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 006.044.048
    Elf2flash 09.11.000
    CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 0600
Selecting CMT flash...Result: 0000
Phone is in flash mode...
CMT blocks: 958, APE blocks: 0
Erasing cmt...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.c00...
Erasing cmt zone 00040000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00A00000 - 0759FFFF ... Erase result: 0000
Erasing cmt zone 0F1C0000 - 0F8BFFFF ... Erase result: 0000
Partition result: 0014
Partition result: 0014
Partition result: 0014
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.v395_20...
Erasing cmt zone 05420000 - 0759FFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_20.395U...
Partition result: 0014
Send CMT CFG...

Writing cmt...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.c00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS*CORE
Sending CMT HASH for SOS+ROFS
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.v395_20...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_20.395U...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Second try...
Phone not found...
Done!


------------------------------------

塞班助手:


正在分析文件...成功
1.用数据线将手机和电脑连接
2.给手机加上电池
3.短按手机的开机键
等待手机连接...
连接成功
正在读取芯片信息...
--------------------CMT--------------------
ASIC ID:000000010000022600010006400C192101031105
EM0 ID:00000296
EM1 ID:00000B22
PUBLIC ID:01100117785510527E6B3F1BDEE6F3329BE04FDE
ASIC MODE ID:00
ROOT KEY HASH:F2D76DFAFD66C7F195F278417DF05888
ROM ID:4B9B75103E691FF8
正在给手机写入引导数据...成功
CMT RAM ID:0000000000000000
CMT MMC ID:FFFF000000000000
CMT NOR ID:0020004000000031
CMT NOR ID:0000000100000000
CMT MuxOneNAND ID:0020004000000031
CMT Algo:XSR 1.5
正在给手机写入ALGO引导数据...成功
CMT PAPUBKEYS:52570A2086C79E6965175815B5388535CDD5C6F7


C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.c00
正在检查文件...
CMT
正在分析文件...
正在解析文件...成功
正在擦除...成功
正在刷机(64583221)...
正在给手机写入ADA ...
正在给手机写入KEYS ...
正在给手机写入PRIMAPP ...
正在给手机写入RAP3NAND ...
正在给手机写入PASUBTOC ...
正在给手机写入PAPUBKEYS ...
CMT PAPUBKEYS:52570A2086C79E6965175815B5388535CDD5C6F7
正在给手机写入SOS*UPDAPP ...
正在给手机写入SOS*DSP0 ...
正在给手机写入SOS*ISASW ...
正在给手机写入SOS*CORE ...
正在给手机写入SOS+ROFS ...
成功


C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009_prd.v01
正在检查文件...
CMT
正在分析文件...
正在擦除...成功
正在刷机(33814321)...
正在给手机写入SOS+ROFX ...
成功


C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\rm493_510.21.009.02U
正在检查文件...
CMT
正在分析文件...
正在擦除...成功
正在刷机(13640362)...
成功


C:\Program Files (x86)\Nokia\Phoenix\Products\RM-493\RM493_ENO_0741.10_100.71.844.1.a15.fpsx
正在检查文件...
CMT
正在分析文件...
正在擦除...成功
正在刷机(1383492)...
正在给手机写入SOS*ENO ...
成功


等待手机重新引导(如果手机长时间无响应,请手动开机后重新连接数据线)...

失败(错误代码:1182)
失败(2023-02-03 19:16:59)


------------------------------------
每个都刷了不止一次,不同的设置下写入完成后的部分会有点不同,但结果都一样,手机无法完成重启进入系统,麻烦各位看看还有救吗?

xhyooo 发表于 2023-2-18 01:39:19

我有几天一直用的通话的挂断键试图开机,遇到了类似你的问题,最后发现自己脑残,直接 用E71顶上的专门的开关机键就好了。

lax0601 发表于 2023-2-18 22:41:41

xhyooo 发表于 2023-2-18 01:39
我有几天一直用的通话的挂断键试图开机,遇到了类似你的问题,最后发现自己脑残,直接 用E71顶上的专门的开 ...

E71开机键就是顶上那个,理论上关机状态下按挂机键是不应该有反应的。

可乐地盘 发表于 2023-2-20 20:43:55

JAF的刷机过程没有问题,应该是降级了
如果确认没有降级,那就是硬件问题了

lax0601 发表于 2023-2-22 19:43:39

可乐地盘 发表于 2023-2-20 20:43
JAF的刷机过程没有问题,应该是降级了
如果确认没有降级,那就是硬件问题了 ...

好吧,我猜测可能也是硬件出问题了,那就不折腾了,谢谢回复。
页: [1]
查看完整版本: 大佬们帮忙看看这台 E71 是不是没救了。